Conveyors and bucket elevators
Belt conveyor
Belt conveyor for the material flow inside a plant — routes sized on the throughput of the line, with supporting structures built to the geometry of the building. Supplied to the Cemacon ceramic block plant and to AMBRO Suceava.
Also known as: conveyor belt · belt conveyor system · transfer conveyor
Specifications
Industrii
- Construction
- Food
- Agriculture
- Individually sized — on your material, throughput and space
- Technical proposal and price, normally within 48 hours
- Installation, commissioning and service from our own plants
When to choose it
The concrete situations where this machine is the right answer — and the one where we recommend something else from our range.
You convey material in lumps, packaged products or parts — a screw cannot handle them, a belt can.
The route is long and horizontal or on a shallow incline, and the material does not have to be sealed in.
You need the new machine to fit into a plant that is running, without replacing the existing installations.
You want visual access to the material along the route, for inspection or manual sorting.
When this is NOT the right machine
If you convey fine powder that must not reach the hall atmosphere, an open belt is the wrong choice — dust rises along the whole route.
Vezi Screw conveyorHow it works
The belt conveyor moves materials horizontally or on a shallow incline, in the continuous flow of a plant. Unlike a screw, a belt handles material in lumps, packaged products and parts, not only powdered bulk — which is why it is the usual machine between production stages.
In a plant that is running, the difficult part is not the belt but the integration: the route has to pass between the existing machines, the supporting structure has to bear on the geometry of the building, and the throughput has to match the pace of the downstream machine. We build all of it to order, on your plant layout.
We have supplied routes of this kind for the Cemacon ceramic block plant and for the AMBRO Suceava paper and packaging mill, in both cases integrated into installations that were already in place.
Route sized on throughput
Belt width and speed chosen for the real pace of the line.
Structures to order
Support frames built to the geometry of the existing building.
Integration without a long shutdown
Connects to the machines in the plant rather than replacing them.
Guarding included
Guards, emergency stops and safety accessories along the route.
Variante constructive
What actually differs between them — not just what they are called.
Plain belt, horizontal
The usual version for straight runs between machines.
Cleated belt, inclined
Transverse cleats hold the material back on the climb. Chosen when the route has a gradient and the material would slide back on a plain belt.
Belt with sidewalls
Side walls on the belt, for fine material that would spill over the edges.
Z-belt
A stepped route — horizontal, climb, then horizontal again. Used to feed a machine positioned higher up, when there is no room for a long ramp.
Frequently asked questions
Question not answered here? Write to us — an engineer replies, nu un robot.
What throughput can a belt conveyor sustain?
Throughput is set by belt width, belt speed and the type of material. See the rows in the specification table. When sizing, we start from the pace of the downstream machine, not from a theoretical rate.
What is the maximum incline?
It depends on the belt type: a plain belt has a limit above which the material slides back, whereas a cleated belt climbs much more steeply.
Can it be installed in a working plant, without a long shutdown?
Yes — that is what we did at Cemacon and at AMBRO Suceava: the routes were built to fit into the existing installations, on the geometry of the building. Installation time depends on the complexity of the route.
Belt or screw — how do I choose?
A belt for material in lumps, packaged products, parts and long routes where dust does not matter. A screw for powders and granulates that have to stay in a closed circuit, with no emissions. If the material is powdered and the hall has to stay clean, choose the screw.
Do you deliver and install in the Republic of Moldova?
Yes. We have a production plant in Bălți and we provide delivery, installation, commissioning and service in both Romania and the Republic of Moldova.
Typical applications
Projects where we used this machine
Construction materialsBelt conveyors for a ceramic block plant
Belt conveyors integrated into the production flow of a ceramic block factory — routes sized on the throughput of the line, with supporting structures and guarding built to order.
See the projectBelt conveyors for a paper mill
Belt conveyors for the material flow of the paper and packaging mill in Suceava, integrated into the existing installations.
See the project